The picture was spot on David. Shows how a dummy parts guy at most dealers would mess it up and say it's not available.
Printable View
The picture was spot on David. Shows how a dummy parts guy at most dealers would mess it up and say it's not available.
hey nate...can u look and see if its the same part# for that brake booster, mine on my L92 intake is broken and im gonna have to replace it and i need a part number.
12559760
so where did y'all tap in the coolant hose that's supposed to go from throttle body to the radiator?
pics would help as well
I think i almost have everything for swap.... my cam is coming in on tuesday then i'm installing that. i need to find a harness this week and maybe get a starter, then order pushrods
Is there anything else that i should know bout that others ran into? i'm aiming for the swap to be in the first or second week november
I've tapped mine into the water pump body right next to the heater hose.headers022.jpg picture by redheartbeat - Photobucket
so it don't really matter too awful much where it goes?
i don't really feel like tapping into the pump itself, but i can do it to the reservoir->radiator hose or either of the heater hoses going to the firewall, right?
Hey guys I know this thread has been going on for quite a while but I have decided to go ahead with this swap for my truck (1999 GMC Sierra 4.3 1500 4wd for a 2002 Yukon 5.3) and have already bought the motor and most of the parts i need but have already hit a problem with the intake and the EGR valve. The intake on the motor I bought does not have the port for the EGR Hose. Any suggestions? or Comments? I am worried about emissions and will get another intake if i have to...
You can see the plastic where it is supposed to go. I just don't want the AZ emissions to fail me or the engine to throw some code that it lost contact with the EGR or something because it is not plugged in