Lq9 cam change - Putfile.com
Is this much blow by normal. Keep in mind I have no idea what I am doing. I am just trying to make progress using the ls1tech how to as a guide.
Cam is out. Got to go get some cleaner and lube for the new cam.
Printable View
Lq9 cam change - Putfile.com
Is this much blow by normal. Keep in mind I have no idea what I am doing. I am just trying to make progress using the ls1tech how to as a guide.
Cam is out. Got to go get some cleaner and lube for the new cam.
That is not normal. Try hitting the top of the valves with a wooden hammer handle to reseat the valve. Maybe it has some dirt in it.
no doubt, smack those valve a couple times with a rubber mallet. If it doesnt quit you need a valve job.
That worked still a little blowby but not in the valves.Quote:
Originally Posted by RedHeartbeat
Thanks a bunch I would not have continued with yalls advice.
OMG Zeake...I have NEVER seen blow-by that bad...EVER. Yeah, I always take a rubber mallet (or regular hammer... :) ) and give the top of the valve stems a little tap-tap. It reseats them like everyone else it talking about.
I'll post another video of the current blowby in a little while.Quote:
Originally Posted by txarkitekt
That is air leaking past the piston rings. Not out of the ordinary. Put a couple drops of oils in the cylinder and most of it goes away.
On a side note, watching your video, saw this one too and almost fell out of my chair. :laugh: Crazy Boy Friend - Putfile.com
Thats just wrong she could file charges against that basterd.:tvhaha:Quote:
Originally Posted by RedHeartbeat
Ok, now that sounds better... You may proceed sir!
OMG Greg...that is flippin hilarious!