Printable View
6 hrs start to finish, cleaning the block took the most time. Runs ok with the tune that i have on it, but without atap i cant really see whats going on. slightest lope through the stoch exhaust. Noticed the trans fluid was brown, so I am sure it wont last too much longer.
What cam did you go with?
Hope everything works out with the new cam and heads. It sounds great!!! Thanks for the advice with heads and old cam. The cam will go in shortly, but I may wait on the heads till January. Thanks again Hay Hauler!!!! BTW nice truckQuote:
Originally posted by Hay Hauler@Dec 14 2003, 09:25 AM
6 hrs start to finish, cleaning the block took the most time. Runs ok with the tune that i have on it, but without atap i cant really see whats going on. slightest lope through the stoch exhaust. Noticed the trans fluid was brown, so I am sure it wont last too much longer.
hell.............., what cam and heads did you go with?
Stage I heads 218/224 cam. Really can't tell that much of a difference
over the stock heads and cam. I couldn't feel much of a difference when swapping from the 5.3 to the 5.7, guess I have a numb SOTP meter! Idles a little rough, but I think I need to drill the throttle body out. Have to do some more research to fine tune it. Plus with out Atap it is a shot in the dark (bidding on a few different scanners). Protruk, just let me know if you want some help installing the cam.
nice! hows your driveability ,mainly mpg, with that cam?
I guess this means i'll have to be in the 12's on the 2nd, hehehehe.
see ya at the track,
allen
Well if I had slicks that just may be a possibility! haha No really I am hoping for low 13's. Remember I am 700 lbs more so I have to make that difference up just to get even. Now that NOS kit I sold would do the trick!
Homer Nitttrrrous :nx: :nx: :nx: :rock: