Tune??

I have a Q?

Will my truck run and drive for a month till I have the funds to tune it with these mods??

Built 4L60e
Yank TT3000 Stall
HPPIII
Exhaust
K&N FIPK II


I am mainly worried about the new Stall/Tranny with the Hypertech, What do you think ??

I plan on doing E-Fans/Thermo while im there ...

It'll run but I got a code (P0757, I think) caused by slipage of the converter and your converter is looser than mine. When that happened It locked in second gear. It doesn't happen to everyone but it can. If it does, you have to stop and turn the truck off before it will shift again.

It only happened to me when I would ease away from a stop when the trans fluid was cool but it did happen to me twice.

I have HPTuners and it was easy to fix by raising the shift points closer to the converters stall speed at low throttle but the HPPIII will only change then at WOT.

You'll probably be OK but that is the issue that can happen.

Eh!! I guess I will pull funds from somwhere and get it tuned as soon as I get the truck back together.. I dont want to have to deal with it ..

It doesn't happen to everyone but it is a possibility.

No worries your good with thoes mods. Could they be improved with a tune yes, But your golden. P0757 is for the 2/3 solenoid? P1870 though could be a posabilty, But not common.

Save the efans for when you get a tune IMO.

hey man your not too far of a drive from Allens shop, you should go check it out... i drove from dallas to down there and it was worth every peny spent.. my truck runs like a dream now