TPS diagram????

Dudes,

I just finish installing my ZEX race nitrous system, eveything is OK, less one thing.

It came with a TPS activation module.

In the ZEX diagram states that the white wire should go to the TPS output voltage wire!!!!

My TPS has 4 wires, a b c d.

Don't know where to conect.....any lights out there.....

Thanks in advance

Gabe

i used a voltage meter to find the correct one when i installed the ZEX kit on my other truck. have someone press the gas pedal a few times while you stab the wires.

Unplug the harness to the TPS. Use a volt meter, one will be 5 volts and one will be ground. The other will be the wire you want. Sorry I always think someone can read a VOM or DVOM meter. Maybe someone can chime in with the correct color.

Quote:

---

have someone press the gas pedal a few times while you stab the wires.[/b]

---

Did that, but 2 wires have juice, one intermitent and one all the time, 2 dead all the time.

Quote:

---

one will be 5 volts and one will be ground. The other will be the wire you want[/b]

---

Ok, that left me with 2 wires, which will be he one!!!????

OK guys

My BAd

I was trying to hook the ZEX to the IAC LOL

So sorry about that, that's why I always saw 4 cables.

Just hooked to the TPS and works perfectly, the Learn was done.

Thanks for all, problem solved, now you can close the thread!!!!

Wow glad you got it. I was stumped on the 4 wire thing.