-
Im thinking of going with 210/210 - .479/.472 - 112 cam. My plans are to have a little lope, but I dont want to go with a real big cam because Im trying to reuse my stock springs. I also plan on milling the heads .030 to raise the compression from 9.5-1 to 10.9-1. Will this setup be good or not? I want it to have more power but also want to have an awesome sounding idle. Thanks for any suggestions, Brett
-
if you want a nice cam get a comp cams XR265R 212/218 on a 114 center and for about 60 bux you can get ZO6 valve springs. My truck has a nice lope and runs great with this cam.
-
I would replace the springs anyhow. You dont wanna risk that.
