4.8/5.3/6.0 A/C bracket on 5.7

Here is what I've been working on. I finished the machine work and will fit everything up tonight. If it works, this could be an option for your swaps. I'm using the truck A/C bracket and the 5.7 balancer to make the necessary pulley adjustments.

Before
http://i33.photobucket.com/albums/d7...7/4bf42452.jpg
http://i33.photobucket.com/albums/d7...7/53df54c9.jpg

After
http://i33.photobucket.com/albums/d7...7/P1010026.jpg
http://i33.photobucket.com/albums/d7...7/P1010027.jpg

Before
http://i33.photobucket.com/albums/d7...7/P1010028.jpg
http://i33.photobucket.com/albums/d7...7/P1010029.jpg

After
http://i33.photobucket.com/albums/d7...7/P1010030.jpg
http://i33.photobucket.com/albums/d7...7/P1010031.jpg
http://i33.photobucket.com/albums/d7...7/P1010032.jpg

Looks good. Lets see it on the engine, now. :thumb:

I just got home RHB! I don't have much time to work since I have to be up at 4:00. My only concern with this set up is the belt walking towards the crank but I think it will be OK. If not, I'll machine the raw metal off of the back of the balancer and shrink a ring on it. If that happens I'll have to find out the balance speed of the balancer so I can balance it. I can make a Greg (mandrel) for the balancer if that happens.

Now I know who to call if I need a pulley made!
Looks bad *ss keeps us updated.

Thanks! I just have to keep things simple and use my imagination.