park neutral switch

I've completed my conversion for the most part - got it running, and tried it out. I went with a mega shifter and I'm hooking up the neutral safety switch now.

There are a couple wires for the switch - do I wire them all together and tie them into the switch or just the PRND P one? I believe this is pin 34 blue.

The company that did my harness calls for a single org/blck wire but as far as I can tell that is for a camaro harness - pin 34.

What do the other PRND wire do?

Any help is appeciated.

Brian

Switch? What is that? A reverse light switch would be nice but my 92 and 93 LS1s did not have the shifter wired to the PCM at all. As far as I know nobody does in their conversions.

The only reason that I'm concerned is that when I took my trans in for a tail shaft installation - it's going in a jeep - They said that the PN switch somehow controlled line pressure, and that too much would cause it to go boom.

Doesn't it also mess with maf and egr?

<div class='quotetop'>QUOTE(TravelnMan &#064; Jan 4 2006, 01&#58;09 PM) [snapback]39835[/snapback]</div>

Quote:

---

I&#39;ve completed my conversion for the most part - got it running, and tried it out. I went with a mega shifter and I&#39;m hooking up the neutral safety switch now.

There are a couple wires for the switch - do I wire them all together and tie them into the switch or just the PRND P one? I believe this is pin 34 blue.

The company that did my harness calls for a single org/blck wire but as far as I can tell that is for a camaro harness - pin 34.

What do the other PRND wire do?

Any help is appeciated.

Brian
[/b]

---

Brian...My harness came with the same single orange/black labeled "nuetral-safety". Would the engine start if this was not hooked-up to a nuetral-safety switch? I never got a clear answer on this either? What should I do with this, & be polite&#33; Thanks,Gar

The neutral safety switch isn&#39;t needed as far as I know. Maybe hooking it up will make mine .1 sec quicker? :laugh:

Mine isn&#39;t hooked up either&#33;

:imwstupid: Mine isn&#39;t hooked up either&#33;

Thanks fellers... :cool: