Finished up a 6L swap on a 2001 extended cab Silverado last week.
This truck had a 5.3L in it, 4.10 and posi, stock stall.
We installed a new 6L, AED heads (fully ported / built) 226/228 cam and 42lb injectors.
I couldn't believe what it ran Friday!
This was on the stock stall and tires. Most ppl say they have traction problems, this one really did, in first, second and third.
I can't remember if it was a 13.2 or 13.3, but it was at 105 mph!!
The trans didn't like it one bit, so a stall and built trans is going in real soon!
This truck should be good for a mid 12 with traction and a 3000stall converter.
I need to post up the dyno results, but it was somewhere around 380hp to the wheels.
Just letting you know what can be expected or close to from a cam/headed 6L in an extended cab.
The owner doesn't post up much, but visits, so I figure he'd like to show off his results.
Matter of fact, there are a lot of guys down south that aren't posting up and have some fast ass trucks!
I'll post some pics up later,
allen
