Just a quick question as far the coolant temp and oil pressure goes, what switches are you all using and or what adapters and part numbers would be helpfull.
Printable View
Just a quick question as far the coolant temp and oil pressure goes, what switches are you all using and or what adapters and part numbers would be helpfull.
I am using the 3 wire coolant temp sender/sensor from a 98 camaro with an LS1. Oil pressure is the stock LQ4.
Same here. Camaro water sender and stock LS oil sender
Same here but for some reason my temp gauge is about 20 off. I had a 2 wire and a 3 wire, heated up a pot of water to 210 and tried the sensors. Hp tuners showed the 2 and 3 wire sending units both sent the same temp to the PCM, within a degree or two, so I went ahead with the 3 wire, but the gauge reads about 20 degrees cold.