p0342/p0343 cam pos code any ideas.

Ok 6.0 230/250 keeps throwing the cam pos code high and low but usually just the low, usually after stalling up or going WOT, ive changed the cmp sensor 3 times, changed the harness from the pcm to the cmp twice, changed out the CKP just for good measure, changed battery, starter, alternator, pulled ghe cam nothing wrong with it, changed pcm's nothing has fixed it. Its always bank 1, so could a bent reluctor wheel be causing this, I know that sounds crazy but im just wondering. Im totally out of ideas.

I'm assuming it's the gen 3 style? Slap a stock cam in it and see what happens

Yea ive got a stock 6.0 cam and another aftermarket ive lined them up and they appear identical but ill probably swap them out

Bump