couple ac bracket questions

I'm a bit confused when it comes to my ac. I'm gathering info and parts for a 4.8/5.3 swap and I'm down to the ac part. I have a 95 and its a 134 unit, and I would like to keep it, what bracket do I need. I found the r4 bracket but not sure if it applies for the 94-95 units. Thanks guys

This is pretty cool
http://www.maliburacing.com/forum/vi...p?f=34&t=79059

If your original compressor is mounted on the passenger side of the engine, then the link posted above by Chevydillan will work. It takes some tweaking but definitely works. I used it on my swap. I only had to scrounge up some different idler pulleys for some belt clearance issues.

Quote:

---

Originally Posted by LOWnEASY

I'm a bit confused when it comes to my ac. I'm gathering info and parts for a 4.8/5.3 swap and I'm down to the ac part. I have a 95 and its a 134 unit, and I would like to keep it, what bracket do I need. I found the r4 bracket but not sure if it applies for the 94-95 units. Thanks guys

---

I used the r4 a/c bracket from dirty dingo. Don't have to tweak anything, comes with tensioner pulley as well. Just cost $250 but i think its worth it.

http://www.ls1truck.com/forums/lsx-t...ok-up-how.html

Thank you all! Love the idea of the stock compressor and bracket! Not to wild with the fabrication neither. To bad all my accessories when with my old motor..