Parting out 6.0L/TH400 Silverado DFW

I now have a bigger project requiring more funds and can't justify having two , so I've decided to part out my truck a 2000 Silverado. For the moment I am only looking to part out the engine and trans, cooling and fuel systems. Once I have sold these parts I am probably going to sell the whole thing as a roller from there. Reason being it is stripped down, and not so much a daily driver anymore. The only thing in the interior is a steering wheel a shifter and a seat. This is a perfectly good running truck, no issues with any of the parts. I'd like to sell as much as possible locally in DFW but if there is a reasonably sized part you'd like I will add shipping on top of the prices.

1) 2006 Lq9 30k miles (ON HOLD at the moment unless buyer backs out)
2) Pacesetter LT's the painted type which are now an even surface rust coat. $150
3) Custom ORY with 40 series muffler dumped before the axle $100
4) Airbags driver and passenger $200 for the pair or 100 ea
5) 160amp alternator from an ambulance, great for running a large electrical system $100
6) Stock radio/tape player $30
7) Clutch pedal and master cylinder $80
8) Stock 5sp drive shaft from a NV 5sp $100
9) Lt1 E-fans $100
10) Stock radiator (w/o trans cooler) $100
11) Built Th400 I'd like to offer the enter transmission as a package to anyone looking to do a conversion on a RCSB. Trans has a straight cut 1st and 2nd gears, and is built for "800hp" as irrelevant as that number is on a trans build.

Asking $1500 for the package I have roughly 2600 into this 400 swap in parts. It has roughly 3500 miles on it as do all the parts. With a 9.5in converter and light drive shaft and a stock 6.0 it will spin the tires at 60+mph, a very fun/responsive transmission.
a) Trans
b) Trick FLo deep quart oil pan
d) Hurst quarter pro shifter and pedestal
e) 9.5in Converter 2800 stall from Phoenix (spools very fast and is very fun!)
f) Aluminum driveshaft cut to length with a high quality slip yoke I forget the maker.
g) stock oil pan and filter also included
h) Trans temp and PSI guages and senders
I) small external trans cooler, only recomended for light vehicles (this truck is 3700lb) the trans stays cool
J) I can include a x member I built too, requires modification to your truck.

12) Aermotive fuel PSI regulator $150
13) I have a stock tank sumped for external system $100
14) External fuel pump, flows enough for a 6.0 don't remember the specs $40

*Everything is still in the truck, running and driving. So if you are interested in anything, please realize I will be taking the truck down this week and it will take a couple days before any of the parts are available, I just drove it into my shop and will start pulling engine/trans middle of the week.
My plan was to slowly build this into a drag truck but it has never seen a pass at the track, only street use, I just put M/T slicks on a couple months ago, literally 200miles on them so if this is sold as a roller it will be sold as an "off road use only" due to the removed air bags/ crash bars, the truck is light around 3700 empty. I have no price on the roller yet as I may start parting the interior out etc in the coming weeks. I will be adding pictures of all or at least a lot of these parts in the coming weeks. Please PM me for phone number or any other details, I will drive to meet in the weatherford/Ft. worth area within reason. Thanks!