Printable View
New 370, +5cc dome Wiseco pistons, l92 heads milled .040, 11.8:1 compression..
Idle first started at 12.5 afr, in the vid its at 14.3, itll sound alot better when i get it leaned up. Idles at 80-82 kpa. Drives around very good!
click
http://i24.photobucket.com/albums/c3...psa99cf28f.jpg
http://i24.photobucket.com/albums/c3...pse0f8b427.jpg
sounds nice Tyler, should run very well, digging the cam, damn near the same as mine ;)
what made you go dome piston? instead of maybe -2 or -3 fatttops with .052 mill ls9 gaskets ? was it cause the heads were already milled .040 ? just currious thats all, my compression is pretty damn close to yours at 11:9
I was just wanting high 11 compression ratio. My heads were milled .030 and needed another .010 off when surfaced and had them checked and were 64cc chambers. I used the ls9 gaskets.
Heres how I figured mine. +cc you actually use a -. and wiseco pistons are 0 deck.
http://i24.photobucket.com/albums/c3...ps3377e90f.png
Btw skeet what is your cam?
252/263/621Quote:
Originally Posted by dirt track racer 81
gotcha
Sounds nice!
sounds wicked