Been doing some reading. Seems like the big players use a/w kits. What's the benefits of the a/w over the meth? Even with the cool cool iat and race gas will it hold the timing as spraying a good amount of meth?
Printable View
Been doing some reading. Seems like the big players use a/w kits. What's the benefits of the a/w over the meth? Even with the cool cool iat and race gas will it hold the timing as spraying a good amount of meth?
Dunno the answer to your question but siliconintakes sells a pretty badass A/W setup
for a pure track setup you can not beat a race gas setup using a A2W but you are also draining and refilling the ice tank every pass....for a street vehicle the meth works
Basically, because RACETRUCK!
Boost the shit out of it and hold on
Lots of things to look at.
Boost
How large the core is
Octane of fuel.
Meth injection adds octane.
But would take a good amount to drop air temps as low as an air/water core will with using ice.
Lots using using meth shows great temp drop. But they are spraying the meth at the temp. Sensor.
As cheap as that core is.
I would so both.
If you plan on "street driving" the truck. Put a HUGE HX in the system.
Probably get a 8-10
Gallon fuel cell in the back for the water.
You will also want a 20gpm pump as a min. flow.