Printable View
Just wondering if anyone is tucking 325/50/20 on a flipped axle truck. Rim is a 20x10 or 12 not sure. I've done alotta measuring and its gunna be real tight. I've heard of 315s being tucked. Just seeing if anyone is. Trucks a rcsb, fleetside. The rear fender lip is cut down flush.
Pic of rims and tires are included. Fronts are 255/50/20's. Rims are supposedly intro's anyone know for sure.
Thanks guys
Ya my truck is tucking a 325 40 17
I ran a 325 50 15 and it sat flushed
it really depends on the backspace of the wheels. those don't look like any Intro's i've ever seen. i see the valve stems are on the backside but Intro's it will be behind one of the spokes, not in between 2.
i could be wrong, but i would send that pic to intro & ask before i bought them as intro's.
^^ BS is the main thing. Im running 15x10 with 6.5" BS and 325/50/15 nitto 555r's. They stick out about 1/4-1/2 inch. 325/50/20's will be tall!!
I'm gunna send a email off to intro and get them to authentic them. I've already purchased them. I paid 600 bux for them so intros or not, it was a good deal. They replace my ugly other ones, and are way lighter ! They also came with nitto tires, 2 of which I can use so I basically got them rims for free as the 2 tires are more then 600 for the pair hear in Canada.
02camaross - yea the 325/50 is almost 33 inches tall and 13.5 wide. I swapped them out for 275/45s. Think I may put some 295/50s on it in the spring.