1996 5.7 to 2002 6.0 wiring need diagrams

Well i posted over on gmt400 and got no response yet, so i figured id give you guys a shot. i have a 1996 c1500 and i have done alot of work to the truck, and im in the process of puttin in a 6.0. If anyone could either give me or ponit me in the right direction, i am looking for wiring diagrams for the fuse block for an 02 silverado and my 1996, and i need a diagram for the firewall wiring on the 1996. here is my plan, i got a wire harness from the interior of a 02 silverado, so my plan is to cut the connector that connects the interior harness to the fuseblock under the hood, and pin that into the firewall harness of my 96. I think that would be easier to run the fuseblock from the 02 rather than splicing the engine harness into the old 96 fuseblock. I have a fuseblock and will get the engine harenss with the 6.0. So what i need:

diagrams for 02 silverado 4.8 or 5.3 that i need:

Fuseblock
interior (behind dash threw the firewall to the fuseblock underhood)

diagrams for 1996 c1500 5.7 that i need:

Fuseblock
Firewall
interior (behind dash connects to firewall harness)

thanks for anyof your help in advance.....

alldatadiy.com

I think what you are describing is going to be much more of a pain than just splicing the 02 Engine harness in to the '96 truck's wiring.

For a 1996 truck, all you need to do is make the new engine a stand-alone install, wiring wise. Its pretty straight forward. You can easily hook the few wires from the stand-alone into the existing '96 power center(fuse block). All you need is the C-100 connectors pin-outs/wire colors. The C-100 connector is the black plastic port(group of wires) that exit the firewall in front of the driver, in the engine compartment. That, and the power center fuse/wire diagram thats in your trucks owners manual.

ur rigth the c100 connectors diagram is what im looking for unfortunatly i never got a owners manual for my truck, ill check alldata at my old work maybe it will have it thanks for all help and help in advance

i tried all this on my 97 swap, after alot of cussing and countless hours of staring at wiring diagrams i said it and bought one from Nelsons! lol

Not sure if I can help but I have a '94 wiring diagram schematics book and a '99 GM service manual. They were helpful for my 6.0 swap in my '93.

Just in case you still need firewall pin outs I have some for a 97 K1500. 350 vin R. Hope this helps.

i have diagrams in my build thread. the link is in my signature.