-
2000-2002 Silverado's
I just picked up a 02 Silvy for parts (RCLB) in pewter color bed in good shape interior half way decent good running gear(4.8/60e). My new 00 RCSB will be receiving some of the interior items and running rear the rest from the truck will be parted out and sold. Both trucks are 2wd, the 02 has a fairly recent DJM 4/6 on it as well as shaved tailgate/rollpan/tonneau(soft) but in good shape. Hood is gone, pass front fender is gone, has stock 16"wheels with junk rubber(gray steelies). I will post pics of the 4x corners of the truck along with some inside shots. Don't hassle me for a picture of the drive shaft nut you know what they look like if not crawl under your truck and look. I am only taking pictures of parts requested( not going to spam the post with a ton of pics) and local pick up on parts and removal only, shipping small parts only like switches etc. I don't have a lot of time with truck to remove everything , so if you are local to 08027 bring tools and get your parts.......BTW 4"propshaft. All items shipped/handling will be taken care of buy the buyer, and all parts are "AS IS" . 3;73 G80 all parts have 210k on them
-
Hate to burst your bubble but pics are required per the site rules.
-
Do you have one of these? I need a hinge and the bracket that bolts to the hood.
http://i1057.photobucket.com/albums/...l/5cce00e8.jpg
-
-
Hey Jansen sure do i will shoot you over a photo in a day or soo. If you have smartphone i can take a pic and send it faster
-
Samsung galaxy 601-580-4373
-
-
-
E-mail if small parts are needed and i will let you know if i have.
Parts taken off no longer needed.
Core Support $125
Hood Latch bracket support $60
Steering column with Airbag and tilt non cruise, foam wheel $200
Good running 4.8/60e 3:42 G80 brake to brake, engine harnes,body harness, chassis harness,computer, motor mounts,pcm mounting pod( black plastic that is located in engine bay that hold pcm) all accessories, intake to pan, fuel rails and injectors. and fuse block.Trans was rebuilt 100k ago(300k total miles on clock) $1000
Hood Hinges L/R $50
Good shape 8ft bed no tailgate $300
Good passenger fender $150
Good driver door $225
2wd longbed frame straigh and clean $500
All parts are dent free or have minimal dents/scratches/blemishes...etc
Color of all parts is gold or pewter or champagne in color however you look at it.
bed, doors and frame will fit 99-06 chevy/gmc/ tahoe yukon.
•Location: SJ
-
Headlight buckets gone, Front bumper gone, Lowering kit removed and pending sale, frame gone, rear gone,interior gone, seats still left ( manual).....Come on guys make offers on these parts, whatever doesn't sell goes to the scrap yard. (I <3 SCRAP) :D
