anyone willing to let me use their balancer intaller tool in the dfw area, willing to give a 12 pack:beerchug:
Printable View
anyone willing to let me use their balancer intaller tool in the dfw area, willing to give a 12 pack:beerchug:
Auto zone and orreilies should have one ask for the big one tho.
He's talking about the INSTALL tool not the gear puller.Quote:
Originally Posted by kerrige
I'll have the hammer and 2x4 ready, just bring my 12 pack!
i already tried both and they dont work with ls motors,
i was trying to make my own its just that would be cheaper to buy one instead, and im trying to avoid that since i wont use it again.
what part of DFW? It is a huge place.
I've done it that way multiple times.... LolQuote:
Originally Posted by chvz99
over by arlington
Put the balancer in the oven for a little while. Works like a champ for me. Iv used this method half a dozen times with no problems
I bought 14mm x 2 pitch allthread, a nut and four washers to do mine with. Put grease on the threads and between the washers and it works great. Bought it all at fastenal.
What part of arlington? I am at 360 and brown blvd when at work. Arlington is right on the other side of 360 from me.