will that trans work with that enigne and ecm? or do i need to do something else? my 2002 trans went out and i can get a new free 96ish silverado 4l60e. thanks
Printable View
will that trans work with that enigne and ecm? or do i need to do something else? my 2002 trans went out and i can get a new free 96ish silverado 4l60e. thanks
yea that trans will work fine. you need tlo get a flywheel spacer and slot the holes on the flywheel so they line up with the torque converter. the spacer will go betwwen the flywheel and torque converter.Quote:
Originally Posted by Venom
wow really? so the electrical plug isnt an issue? will the converter out of a 2002 4l60e work in the older 4l60e?
so no tuning to the ecm or anything is needed?
electrical is the same but conveter is not the out put shaft were the converter gos is a lil longer on the ls style 4l60e
ohh ok gotcha. will the flywheel from the 96 ish silverado work on the 5.3?
where can i find the spacer at?
you would probably be better off using the flywheel from the 5.3. simpply take a dremel or die grinder and make the holes a little longer. i did about a 1/4 inch on each hole and it lined up fine. i got my spacer and bolts from jegsQuote:
Originally Posted by Venom
http://www.jegs.com/i/JEGS-Performan...01010/10002/-1
and dont forget the longer bolts
http://www.jegs.com/i/JEGS-Performan...01011/10002/-1
the spacer will go on the transmission side of the flywheel before the torque converter.
Awesome thank you! I only have one more question. I found out its a 1990 silverado. Will that trans still work?
that's a 700r4. Personally I wouldn't go through the frustration of using one in a Gen3 truck.
+1Quote:
Originally Posted by RedHeartbeat