lowered truck owners, come on in!

Currently, I'm using DJM shackles and hangers which lowers the rear 4". The problem with my hangers is they are not open on the bottom. Like this

http://modplant.com/images/DJMEH2602-35.jpg

As you can see, the bottom of the hanger would obstruct the installation of caltracs, assassin bars, etc. I'm looking for a set of hangers that are open on the bottom which will allow me to use some type of traction bars, yet keep the same ride height. Something like this, but for a 2/4 drop configuration.

http://image.truckinweb.com/f/125048...ure_hanger.jpg

Does anyone have a 2/4 drop with hardware that allows for use of traction bars? What are you all running?

When cal tracs made my bars, they couldnt use my hangers so they ordered some from belltech, so apparently belltech has em.

caltracs sent me some hangers that were supposed to keep my same ride height but they didn't work.

Caltrac has the hangers you need. They get them from beltech and modify them to work with traction bars. I just had to go through this not too long ago.

I'm thinking about these but I don't know how the hangers mount. Are they open on the bottom or top when you mount them?

http://www.summitracing.com/parts/BEL-6512/