Printable View
I was wondering what the possibilities are for hooking up transfer cases to the 4l80e. A 241C transfer case is whats in my truck right now (manual shift). What wondering if that will bolt right up to the 4L80E without a problem. If not, whats my other options. Thanks!
will need to change to 32 spline input on the 241
Check out advance adapters. They are pricey, but will have a solution.
is there any other options. what if i used the t-case out of the donor truck, what would have i have to do
what do you have against swapping inputs? this is gonna be cheapest/easiest method imo.
Is it that easy? I thought there was more involved. If thats all I need to do if swap the input shafts, then count me in!Quote:
Originally Posted by slow600
Yep its real easy as long as you can find the right input shaft. And make sure you have a good set of snap ring pliers. I think it took me about an hour to change mine out. Also when you put it back in ur truck the linkage for the shifter will have to be extended if you didn't already know.
It is only me or My np241c was a bolt on in My 80e swap.Quote:
Originally Posted by 92 6.0
My truck is 2002 4x4 rcsb.
The np241c holds a lot of power.