FS: Tial 44mm Wastegate

CORRECTION, I verified by the part number it is a Tial F46, so it is 46mm. Used for 2 days, Tial 44mm wastegate. Was too small for my setup. 7 psi spring installed. Comes with SS flanges & some short sections of pipe. FYI, it is missing one (1) of the allen head bolts because I dropped it when I took it off. I can't find it. Should be less than $5 at your local nut & bolt shop.

$250 shipped in US 48.

http://i60.photobucket.com/albums/h1...k/tial44wg.jpg

http://i60.photobucket.com/albums/h1.../tial44wg2.jpg

Nice price for somebody. :thumb:

What size did you go with?

66mm Precision. That thing has a 2 1/2" dump on it!

Same one I'm running. :thumb:

Did you have issues adjusting the pressure? I have the stiffest springs in mine and barely get 14 PSI. Looks like I'm going to have to do the hose to both sides of the can to regulate it with a valve to get that last pound of pressure.

Oh, I also have the adjuster screw pretty much bottomed out.

Quote:

---

Originally Posted by RedHeartbeat

Same one I'm running. :thumb:

Did you have issues adjusting the pressure? I have the stiffest springs in mine and barely get 14 PSI. Looks like I'm going to have to do the hose to both sides of the can to regulate it with a valve to get that last pound of pressure.

Oh, I also have the adjuster screw pretty much bottomed out.

---

LOL.. Yep. Put the 18psi spring in and see 9psi..

Sold.