New PB with the dra radials!!!

Managed a 13.6 @ 97 mph. The M/t ET Street radials hooked great. Very sticky tire! Will upload time slip shortly.

good job! whats your setup?

M/T 295-50-16 ET Street radials and 225-55-16's riken raptors for the fronts. Rims are the soft 8 style 16x8. As far as suspension it's the Hotchkis TVS 2-4 drop with front and rear sway bars. Engine is 5.3 with TR 220 cam. LT's ORY, hooker muffler all 3 inch exhaust. FLT Lvl 5 trany with a PI 3000 stall. I have a TCI 3600 that I'm waiting to put in next summer. I probably could have gotten another few tenths off my ET if I had the 3600 stall in it and had it tuned for the 28" tires (street tires are 31.5"). It felt like it was shifting into 3rd about 400 RPM too early.

Nice setup sir.

Ya when I ran slicks without changing I shifted manually to prevent the early shift... But you ran exactly what my pb was with similar set up stocks gears tho I didnt see anything bout your gear set up...

Congrats tonight before the storm was a good night for dfw folks to do pb it was beautiful out...

Yup. Forgot to put my gear info in. 4.11's with a trutrac. Weather was great up here too. Only a light breeze with temps in the mid 60's. All in all I'm happy with it. A combination of better track prep and my DR's helped me drop over a second in my times.

congrats on your PB! that 3600 stall and a short slick (26) will result in some very impressive numbers ;)

like skeet said that 3600 is gonna make a difference, i ran 13.7 on street tires with a 3600, so with DRs on you oughta to really well.

Yeah, I'm gonna throw it in this spring. I'd do it now, but the track only has one more test and tune this season then it's closed for winter. I'm also going to put my C notch in because with the 4" rear drop I only have about an inch and a half of travel. I'm hoping that if it will squat a little more I'll get a better launch. What do y'all think it can do with the 3600? Maybe 13.3/13.4?