Printable View
So I was doing some looking around on here last night and could not find a good answer to this question so I'll ask it. Are the Comp 918 valve springs good springs for a DD or should I look for something else? I read they had a bad batch a while back that was prone to breakage, but I also saw several people who never experienced a single problem. If they fixed the problem it sounds like the spring I'll need, if not it's back to the search.
Are you looking at them as a replacement for the stock springs and keeping the stock cam or as an upgrade along with a bigger cam?
Im looking at upgrading to a slightly larger cam along with them.
How big of a cam?
yes, specs needed. did u mean slightly larger than stock?Quote:
Originally Posted by bangbangskeetskeet
not terribly big, TR220/220 .551/.551, sorry I should have included all this in the original post
918s will be fine mine were used when i put em in and theyre still going 4 years later.
got them in mine, and i have more lift that the cam you just listed
No, I have a pic of one broke on one of my heads that Allen pulled off,
What setup are you running and how long did you have that set in there?Quote:
Originally Posted by Jamest