I got my headers on but need to know what size pipe plug or bolt you guys are using to plug the egr tube on the passengerside header?
Printable View
I got my headers on but need to know what size pipe plug or bolt you guys are using to plug the egr tube on the passengerside header?
Ace- the helpful place... ? idk the size but you can probably find a bold there that will work :)
if i remember right I used an 1/8" NPT steel pipe plug
thanks i was gona just pick one up from work tonight but i forgot before i left.
Where can I get a block-off plate for the EGR hook-up for the passenger side header?
Uhhhh I'm pretty sure that's what this entire thread is about..... Sticking a 1/8 npt pipe plug seals it off pretty well I did it once and saw a little soot build up so took it out and put a little pipe dope on it and seals like a champQuote:
Originally Posted by LOBO
now!
Edit: wrong size corrected
The dipstick bolt is the same size and thread. I just dug through a box of old bolts till I found one. Then put it in with some locktite. Could remove dipstick bolt and take it to a hardware store to match it up there.
yeah i picked up a pipe plug from work and threaded it in.
My bad. I thought the OP was referring to bolt size.