Rear mount guys taking opinions and wondering if it will work.408+y2k 88mm

Well after some thought I am gauging if it will work. I am doing a swap in my CCSB colorado. Im putting a lq9/4l80 in it to work bugs out on the truck and this fall pull trans to have gone through and then will put in the setup. This setup originally going to be in a mustang but .... long story its not going in it and decided to put in truck.
What I have
lq4 donor motor
eagle crank
eagle rods with 2000bolts
mahle nitrous/blower pistons
l92 heads/manly stainless valves/ patriot springs
y2k Turbonetics T6 88mm
precision 46mm WG to small??? should I buy a 2nd 46mm wg??

What I need to buy
Cam <---#1 question
injectors, ID1000s? maybe another just like there drivabilty
ls3 intake, simple cheap works
car manifolds 2.5" or 3" v banded Y pipe to 3" or 3.5" to turbo??????
have the 4l80 gone through(prob rpm transmissions as there close) and vig converter
Will prob also have moser build a rearend.

Things keep in mind the truck gets drivin quite a bit. The turbo inlet will go into the bed and a big panel filter will be on the front upright of the bed so weather wont effect it. The pistons have a -20cc dish IIRC it was @ 9.2-9.5:1 so hoping keep it on pump with meth if needed. I was wondering about the spool time I know it is a large turbo but hoping the DBB helps it.
I was figuring on 10-12psi would like to see @ 750-800hp at the wheels which I wouldnt think it be that hard other than wanting a baby cam in it for streetabiliity.
Hoping posting here will steer me right as this seems to be where all the fast rear mount truck are.

Thanks
Chris

No replys, ill take anything good, bad, it will or wont work.

why dont u give me a call and lets talk....... alot of info u got... few changes to your current idea's... 254 231 1458 KC

Quote:

---

Originally Posted by casey23

why dont u give me a call and lets talk....... alot of info u got... few changes to your current idea's... 254 231 1458 KC

---

Will do when get done eating dinner,thanks.

90 VIEWS ........ no one wants to help the rear mount guy........:)

Quote:

---

Originally Posted by casey23

90 VIEWS ........ no one wants to help the rear mount guy........:)

---

I'll help mount someone from the rear.

It will work! Try some 80lb injectors and a good fuel pump or a pair of Warbros in the tank. Try the stock cam or a 02 LS6 cam. Waste gate will only need to be bigger if you can't keep the boost down where you need it, one 46mm should be fine. A tight 3K stall would be nice too.

rear mount is stupid.....

Lol thanks guys. Was thinking on a ls6 cam they seem to be a great cheap cam that works and proven numbers. Plan to look at converters was on the circleD site last nite. As for fuel was planning 2 255's figured easier than messing with 044s and inj. I like imput on the ones your using as far as how drivability is with them and if anyone has a mpg on basic driving only get 22mpg interstate tops now. Going get some pics posted tommorow as cant figure how to load pics tonight for some reason.

youre spending all this time and money on a awesome motor and turbo,dont skimp on the cam!!! get someone who knows their stuff to spec you one...