Column shift or Floor shift?

The next obstacle in my LM7 conversion is figuring out how to shift the 4l60e....


The detents for the column shifter are inside the column....causing a major head scratching on my part.

Is there a way to get the column shifter to work correctly with the 4l60e with out changing the column?

would it be better to invest in a lokar floor shifter?

A different shifter cable should do the trick.

i had no problem, im using the stock shifter in the column to shift the 60e tranny in my 82 c10

Quote:

---

Originally Posted by pl4yboy

A different shifter cable should do the trick.

---

There is no cable...its all hard linkage...

Quote:

---

Originally Posted by lechez71

i had no problem, im using the stock shifter in the column to shift the 60e tranny in my 82 c10

---

You were able to use the factory linkage? or did you get a kit from somewhere? How does the indicator on the column work with the 4 speed?

Is the indicator electronic or just fluorescent bars? U can use the stock mechanical linkage. We've done a few conversions works fine.