Up for grabs, I have an LDTI emulator that I used when I had my truck running on the stock ECM. It should be just fine as long as you are running SyTy ecm..
Included with the setup is pictured..
Toshiba T-4500 DOS Based Laptop (dead battery.. but AC cord included)
LDTI 128mb Ram Pro-Series Emulator (sells new for $209)
Instruction manual for above emulator..
Also included is a SyTy MEMCAL already setup to plug the emulator in.. Just pull out your memcal upload a bin and go.
I realize this setup isnt as neat as the new type setups that are out there.. But its a complete CHEAPER setup ready to go..
The LDTI emulator has been around SyTy land for a long time, in fact, its was the first one out that worked with our application.. As a result, its about as old school as the truck.. It is a DOS based setup and it does NOT offer real-time programming.. (I have uploaded bins sitting on the side of the road with the truck idling tho..)
I found the setup quite easy to use, sure its NOT as simple as windows based setups, but it does work and its cheaper for someone getting into chipping it maybe what you need.
Here's some additional information
http://www.ldti.com/emulator.htm
http://secure.ldti.com/cgi-bin/store/agora...roduct=Hardware
http://www.turbols6.com/ebay/ldti1.jpg
I am somewhat firm on pricing unless you have something I need LS6 based
$150/shipped to CON-US addresses..
