nelson e fan harness & z28 fans, ????????

i just picked up ls1 z28 e fans with 45k miles ($40) and im calling nelson's monday for a retune and fan harness, my question is what else do i need for the install, like wire, bolts, and ect? i dont want to make a bunch of trips to ace and vatozone when im workin. i used the search and couldnt answer my own ?, i will take pics and what not and post the install up when im done for any one else with my problem.
thanks in advance

get some 1/4 aluminum flat stock and 3 or 4 bolt/washers/nylon locknuts to use on the fan shroud and then you can use the factory bolt holes in the radiator support. i made a bracket to mount the relays to the alt bracket, also doubled as my ground location. make sure you get the right green wire, i can't remember if it is the light or dark though, and take your time with the pcm connector, they are a pain to repin if they come out.

Quote:

---

Originally Posted by sierraman

get some 1/4 aluminum flat stock and 3 or 4 bolt/washers/nylon locknuts to use on the fan shroud and then you can use the factory bolt holes in the radiator support. i made a bracket to mount the relays to the alt bracket, also doubled as my ground location. make sure you get the right green wire, i can't remember if it is the light or dark though, and take your time with the pcm connector, they are a pain to repin if they come out.

---

I'll be doing the same shortly. Have any pics?

LMAO @ vatozone. So not PC. lol

this was on my old truck, and i went back later and covered up the t-tap

http://i262.photobucket.com/albums/i...C/IMG_2444.jpg

cool, thanks.

Yeah, thanks!

I used some of those plastic zip tie things that are used to secure transmission coolers. Worked great and looks pretty clean.

I also used the chance (and extra space) to make a custom 4" air intake setup to go with my modded stock airbox.