4 Attachment(s)
Smokin Deal On A 6.0L Block, Crank, Heads, Cam
I got a core in last week and sent it out to my machine shop for specking, The Block was a 6.0L +.30 over The Block came with a 4" Scat Crank, MS4 Cam, Double Roller Timing Set, Lifters, Pushrods, Melling Oil Pump, L92 Heads With Rockers (springs appear stock), Truck Pan, Rear Cover & Front cover. The Internals look to be Fairly New (Under 10K). The Rods and Pistons were gone off the Pallet( Assuming Theft).
I don't need this setup, My Machine Shop Got Back To Me This Morning And Everything Is Within Speck.
The Crank is Getn Rebalanced & Polished. The Block Is Getting Cleaned, Honed With New Cam Bearings Installed as I Type. All You Have To Do Is Get Your Rods, Pistons &Springs And You Have A Great Builder.
I Can Get The Rods And Pistons And Assemble It For You At My Cost & Labor But Would Prefer Not To As I Am Swamped.
I Want To Sell It As A Package But Will break It Up As Follows:
( All + Shipping If That Applies)
Parted Asking :
Machined and prepped block 30 over new Cam Bearings $450
Double Roller Timing Set $50.00
MS4 Cam $200.00 (SOLD)
Balanced and Polished Sact 4" Crank $550.00
Covers Pan And Lifters $150.00
L92 Heads Surfaced With Rockers And Bases $600.00
Or As A Package Asking $1,650.00
My cost on Probe H-Beam rods and Probe Pistons is around $800.00ish If you want to add them.
Let Me Know I will have picks up as soon as I get it all Back, Prob By Fri.
If you want me to build it for you, I will ask a deposit to cover what I buy For You, Like Pistons/Rods & Springs. As I don't need them or want to buy it all and get stuck with them And Have to try and sell another build..
Thanks
Here is a pick of the heads when I got them in, They are being surfaced and cleeeeeened.
To all the Grammar hounds, Who Feel the need to be our teachers, and correct every miss spelled and not correct (or incorrect haha) wording structure in a sentence... Those Caps are for your Displeasure.
