Printable View
Since I put the 383 in my truck the valvetrain has been really noisy. Is there a way to quiet it down through the use of different rockers, pushrods, etc?
I currently run a TR220-114 with stock rockers.
I plan on tearing my motor down to replace the heads and cam to set up my motor a little better for a turbo so I will have it apart anyways.
.Ty.
do you have correct lenght push rods? please dont say you used 7.4s without a proper measurement of what you actually needed. that right htere could be yoru sole problem with noise.
hahaha. yeah thats what i used. guess I will go and get a correct measurement when I swap the heads.Quote:
Originally Posted by Quik
Can I change the pushrods out with the cam and lifters in the engine? If I can, I was thinking about getting a real world measurement of the pushrod and maybe swapping them if thats my problem. It might be a while before I swap my heads.
Sure you can, pull the coils and valve covers, remove the rocker arms and go to town! You can buy comp push rod lenght checkers from summit.