-
Slammed 96's Garage
-
I really need to update this thing. So here goes:
Sold the 96 and picked up this beauty, 03 ECSB with a 4.8. When bought the truck already had LT's and an ORY. Naturally it needed more.
Project Nightmare
http://i858.photobucket.com/albums/a...e/DSCN0357.jpg
First off, had to ditch the massive tip for something a bit more subtle. Along with this came a tune and some E-fans
http://i858.photobucket.com/albums/a...e/DSCN0361.jpg
Then came the cam; Comp 212 218 low lift 114lsa
http://i858.photobucket.com/albums/a...h_DSCN0566.jpg
-
So are you still planning on rebuilding the 6l and putting it in this truck now?
-
I'm not sure. I'm debating between that, or doing a turbo build on the 4.8. If I go turbo, the 6.0 will more than likely go into another project.
-
I really like the sound of that 4.8 with the cam...how much does that cam run and do you need springs along with it?
-
Thanks! I picked it up from Thunder Racing with springs and pushrods for around $600. I think you can run it with stock springs, but I would recommend putting in some aftermarket ones. Here's a link to the kit: http://www.thunderracing.com/shop-by...ain/Camshafts/
