Printable View
my 04 rcsb is the work truck edition and has manuel windows and locks.im wanting to change it over to power.i know everthing i got to do except the wiring.not sure how to wire it bein it didn't come from factory with power.i figured some of you might have done this change before.if so i could use some pointers how to wire it.thanks in advance
If you lived in az i could get on all data pro and it tell ya how to do most things like that...
i used to have access to all data pro but not anymore but i do have access to gm website
Are you adding an aftermarket kit or factory parts?
To do it completely with factory stuff you would need the BCMs/switches for both doors, door harnesses, dash harness, Main BCM and some reflashing probably. It would probably be a lot cheaper to just put in the factory regulators and make you own wiring with universal switches.
yeah i wanted to do it factory cuz i wanted it to look factory but someone told me about a place in jacksonville fl..aabout 3 hrs from me..they will do windows and locks aftermarket for around 400 bucks..i might just do that..i was hoping to find everthing i need at junkyard but i ain't had any luck finding anything
i was wrong about the price.its 800 bucks for aftermarket kit and to install it.i might just do that in a month or so
If they are putting on those BS aftermarket motors, don't do it, they suck. Get the factory style regulators and wire them in or have them wire them in.
yeah.a guy i work with was telling me they suck.i will prolly just do that and get factory regulators.thanks for ur advice
I have done a lot of research on the topic as well I came to the conclusion that you just need to get the whole cab harness and bcm, either do it the right way or don't do it at all after market stuff sucks that's my two cents or you could just compensate with more power if its fast enough you won't care!