Printable View
all guys with 2 teps, I have a msd 2 step, and works fine.......
But after the pass is over for a while it hesitates some and feels weird.....after a moment, it regains compusture !
I was thinking the O2 are affected...but then again, I have no O2 to make the combustion...
Any tips?
Have you tried to make a pass without using the 2-step to see if the problem is still there?
I'll try that, because now the truck in normal basis don't want to pass 3000rpm, and starts acting like if it was limited !!!!
disconnect, and test.
Ok, my issue is resolved.
Happend that I change the fenders for fiberglass, and lose a lot of ground, so I had to revive the old ones, and make new nice ones.
At the end all my electrical system at this point is great and my Fuel pumps that were kind of going down in pressure (60-58) now are dead on 68-65psi, and wot 62.
Grounds are so overlooked always.....and so damn important.....thank u guys for the help.
Glad you got it worked out. Missing grounds on these trucks can create some very weird problems.