Printable View
Just hoping these will work. Wanting to use these car injectors with my truck harness.
http://www.monstermarketplace.com/Au...15a196152.html
http://www.paceperformance.com/Produ...ges/109076.gif
My car injectors
http://i597.photobucket.com/albums/t...p/IMAG0427.jpg
My truck harness
http://i597.photobucket.com/albums/t...p/IMAG0424.jpg
Thanks! Just want to make sure before i order them.
you have a 'mini delphi' or 'multec' style harness in your truck (i've seen them referred as both).
I can't tell if those injectors are ev6 or not. You could buy those adapters, cut them, and solder them into your truck, but it won't be a direct plug in.
Ok dudes, Thanks to oleshifty and some additional research, I found some adapters that i think will work! Turns out im pretty sure i have the EV1 connectors. So i need this adapter
http://fuelinjectorconnection.com/sh...&productId=217
Jugging by this pic;
http://www.allfordmustangs.com/forum...injector03.gif
Dude, those are 13 a piece. nelsonperformance sells a whole set of pigtails for 35. if you don't want to solder the factory harness, you can get away with heat shrink butt connectors.
i was going to buy the 'adapter' harness, but for that kinda money, and what you spent on your injectors, you could have just got direct plug ins from the start.
Its a complicated back story, But im finishing a project for my buddy that he started. He bought a 6.0 truck motor and wants to use a LS6 intake/fuel rail on it now AFTER he ordered his truck harness already...After i talked to him this morning we decided to try to get the truck fuel rail/injectors to work with the LS6intake...
A picture of it;
http://i597.photobucket.com/albums/t...p/IMAG0423.jpg
you can still cut/solder nelson's ends on. looks like you have your work ahead of you...an extra hour putting on injector plugs won't hurt anything lol.
93blackbeast has a truck harness with an ls1 intake in his swap so it can be done. But, I think he used aftermarket injectors.....
is it just me or is that some custom clearencing on the waterpump tube that comes out the top
Good eye... That was an "experiment" if you will... It has a vette pump on it now.