my 67 project

hey guys im finaly getting progress done thats worth showing I know from these pics it does not seem like much but there is about $6000 dollars and lots of blood sweet and tears in this thing, as you can tell from the fire wall I set the engine back 2 1/2 in for better weight transfer and to get the ds header to clear the a arm, also i body droped this truck 3" and suspension droped it 6" back and 5 1/2 front, i built the rear 12 bolt with 4-10 richmonds spool and moser axles, that is a lq4 and 4l80e with the exception of the ecm I have done all work my self including makeing the wireing std alone with an old msd box to hold the relays, I also replace rockers ,cab corners, door pillars, most of the floor and firewall. the front end is hopfully going to look like a 69 camaro when im done i still have to fab up some head light rings. im running a camaro gas tank. hope yall like it im sure if i get it done in another 5 years it will be nice im just tired of waiting to drive it.

here is some more

Nice work. LQ4 stock? What headers did you use? What rear tires are those?

Got a '68 myself, nice to see another one here.
S.C.

its stock now with the exception of the tune and emmissions gone. i will cam it after i work out the bugs of getting it running, rear tires are 345-55-r15 bf goodrich drag radials on 15x12 6.5 bs i had to get axles with a car bolt pattern and run 11 in car drums on the rear. headers are xscream preformance, but i did have to cut the ear off the 4l80e so the pass would bolt up.

looks good man, love old iron, miss my '70 :(