Price Cut* Complete Procharger Kit (D1sc, 3-core, polished), 8-rib procharger setup
Alright guys, all my FI stuff is for sale. I'm going to list it seperately with a price for each and also deals for those who might want to buy it all. I'd prefer to sell this stuff local to avoid the shipping hassle (lot of parts to box up). I'll drive up to 100 miles one-way for free delivery. If I have to ship it's no problem, but buyer is responsible for shipping costs.
First: The 100% complete D1sc tuner kit for 03-06 trucks, Polished and with a 3-core intercooler upgrade. This kit will come with a 4.00" pulley and matching belt. This set up out of the box on a bone stock truck with tune and cat-back exhaust produced 440 rwhp. This is also the exact configuration I used to go 11.07 at 121 mph in the 1/4 mile with a built 346 ci motor. This is the same blower/intercooler I used to go 10.40's with the addition of an 8-rib pulley setup on the same motor (also for sale). As you can see in the pictures this kit was extremely well taken care of, and is clean enough that my wife allowed me to use the dinning room table to take pictures. The blower has approximately 3000 miles on it total. The oil has been changed 3 times. There are 2 missing pieces which I already have ordered from procharger. They are sending me the intake tube that attaches to the throttle body and the 2 spacers for the alternator bolts. Once these pieces come in this kit will be 100% complete down to every last nut, bolt, washer, zip tie, 3/8 rubber plug, owners manual....etc. I've searched on the internet and have priced this kit with same upgrades at over $5000.
My asking price is $3250.00 Shipped. **Note that the pipe from the MAF to the TB will not be included. Everything else is there.
***Reduced Price***
Second: 8-rib conversion kit for procharger. This kit includes the overdrive Innovators West balancer, HD tensioner and tensioner pulley, Alt. pulley, Powersteering hub and pulley, idler pulley (stock location), water neck kit, and a custom idler I had made for the procharger bracket. Also includes a tensioner brace, 2 procharger pulleys (3.55" high boost, 4.25" low boost) with appropriate belts (brand new), 1 Riechard Racing Pulley 3.5" with appropriate belt (this pulley and belt made 23 psi on the D1sc that is for sale), all appropriate spacers to make the 8-rib kit line up, custom alternator bolt spacers that actually reduce belt slip and my brain. I'll give any assistance you need to get the maximum potential from this set up. I've done a ton of trial and error to get the procharger belt "issues" figured out. This kit has zero (0) street miles and only 12 passes at the drag strip and 15 pulls on the dyno. It is literally brand new. I've got almost $2000.00 in this kit with trial and error.
My asking price is $1050 Shipped. **Note that the 3.5" Reichard Racing pulley is not included (already sold).
***Reduced Price***
Third: 60lb. Siemens Injectors (the same one's Nelson Performance sells for $461.00). This is injectors only, does not include pigtails or spacers. Injectors have about 2500 miles on them. Same injectors I used to go 10.96 in the 1/4 with a single in-tank 255 pump and same ones I used to go 10.46 in the 1/4 with a big magnafuel pump.
My asking price is $300.00 + shipping and paypal fees if applicable. SOLD! Thanks Josh (slowlsx)
If you want the blower kit and 8-rib conversion: $4100.00 Shipped.
***Reduced Price***
Also for sale...............
Complete exhaust system, includes coated pacesetter 1-3/4 long tubes, 3" ORY, into a single 4" magnaflow round muffler dumped. System uses stainless v-band flanges on the headers and factory style ball/socket flange for the catback. Makes for quick 100% leak free connections. Bolt it on and go.
My asking price is $500.00 + shipping and paypal fees if applicable.SOLD! Thanks Juan (SSlammed03)
Alky Control Meth Injection: complete kit with super pump (220 psi) and one (1) M15 nozzle. Comes with everything, tank, wiring, lines, filter...etc.
My asking price is $450.00 + shipping and paypal fees if applicable. SOLD! Thanks Josh (slowlsx)
ATI Super Damper for trucks. This balancer has a provision for keyed cranks which is a must for high boost supercharger applications, stock diameter w/10% underdrive a/c pulley.
My asking price is $350.00 + shipping and paypal fees if applicable. If you want to buy this with the blower kit, just add $200.00. SOLD! Thanks Andrew (1faste55)
Thats all for now. I have alot more stuff, just tired of typing. Pics to follow.
