Printable View
I am in the market for a cam that would have good street-ability, but also have a little more of an edge over the average street cam. I have an 03 Av 1500. Also my next 2 mods are going to be the Dynatech Supermaxx's and The Nelson Tune.
My current mods are: K&N 77-Series Intake, Flowmaster Original 40 Series Duals, FAL Electric Fans, Air-Raid Throttle Spacer, VR Velocity Stack, Granatelli MAF, Hypertech 160 'stat, MSD Wires.
If you're wanting a little more than an "RV" cam as they used to call it, check out comp cams.
Their more streetable cams hang around the .530 lift area, very nice cam for a daily driver and it will pull hard up to or more than 6K rpms. You'll notice a nice gain on the lowend and midrange as well.
For example, their 206/212 will be a nice upgrade over the stock cam, not very aggressive, but noticable.
later,
allen
thanks for the reply, i'm going to look at comps website and check out the specs and prices, just to be safe i'll prob. upgrade the valvetrain at the same time as well.
Hey allen, you have a part number for that cam youre talking about by chance?
54-408-11 it's a nice small cam that will idle perfect and give some nice off the line acceleration and pull to 6Krpms.Quote:
Originally posted by 04Z71SATX@Jan 6 2005, 01:40 PM
Hey allen, you have a part number for that cam youre talking about by chance?
206-212-/.515-.522/112
later,
allen
I'm currently checking out cams. This page and the members on this website have been great help
http://www.fastruck.net/caminfo.htm