Getting Close 87 shortbed THE BOX ROCKS

Well guys, getting close to getting this thing running. Here is the low down
1987 TBI ShortBed, ditched the 4.3 V6 for a L33 Aluminum z71 Motor with 80k. Used Swaptech motor plates with in 1 inch set back position. Running it behind a Th400 with B&M shift kit factory stall.
Decided to go with the carburetor setup. Gmpp intake with Edelbrock 1806 660 carb. MSD 6010 Box. Added C5 corvette exhaust manifolds (if you use these the motor has to be in the 1 inch set back position It is also advised that you get the corvette connector pipe although it will have to be modified) This manifolds only leave a 1/4 inch space between the bottom frame sides. Not running cats - 3 inch piping to a set of used C5 stainless Basinis Exhaust exiting out the middle of the rear.

Added clutch fan for now with install E Fans when I get a Larger radiator ( and I figure how to wire them to a Temperature Relay)

Added 20 inch matte black GFX wheels with spacers on 55 series tires.

Will probably lower it 3 front/4 rear.

Headaches - All that TBI wiring, most will go unused.
I am using the 2005 alternator still trying to figure which pigtail wires do what and how to hook up properly.


This site is the greatest.