Well tonight lost the 4l60e launched hard in 4hi then nose dived and took off again and only has 1st now.... ftl lvl 5 is going in.... What all will i need to do this i know new stall fly wheel and the cross member anything else?
Printable View
Well tonight lost the 4l60e launched hard in 4hi then nose dived and took off again and only has 1st now.... ftl lvl 5 is going in.... What all will i need to do this i know new stall fly wheel and the cross member anything else?
VSS and wiring harness or you can do it yourself.
heres a link to the wiring its simple took me like 5 mins.
4L60E to 4L80E Wiring Swap - Page 3 - PerformanceTrucks.net Forums
driveshafts, some kind of adapter for the t case, I think you can use the same flexplate.
im runnin my stock driveshaft stil but im 2wd
stock drive shaft will have to be cut short about an inch, with the 80e yoke put on and a new U joint, you can get the U at the part store its a precision, part number 488 :thumb:Quote:
Originally Posted by wstewart58
need a flexplate of a 98 f-body, its a dished plate and will keep you from having to use the spacer