Printable View
well my truck has shackles and hangers now, but still sits up higher than the front, was thinking about doing a flipkit but i'm stepside so not sure if i wanna.... mainly im curious about how well itll hook at the track if i was to go with a flip kit???
i did 4'' lca up front and flip kit and 2'' shackles out back to level it
there are many factory vehicles that are spring under axle. if you have traction issue the location of the axle weather over or under isnt going to matter. if you need just put some caltracs on it. gary
i plan on caltracs oneday, right now its 3 inch springs up front and hangers and shackles out back, i'd like to level it out with the front but im kinda worried about my pipes scrubbing, i'll have to do some measuring tomorrow or tonight when i get off work. what do i have to worry about with a flip kit?? pinion angel?
pinion angle and it will need a c-notch.
single cab srt-10 dodges use a spring under with factory traction bar type setup. ive driven em, works okay. hard to say it will really hook though. both where new with 22 inch radials and very low miles (less than 10)...