Printable View
I recently acquired a 03 and up GMC bumper. I have a 00 model and I was wondering if they make brackets for the swap or am I going to have to do some cutting and welding? I took my factory one off tonight to see if it was a direct swap but it was not. Thanks for the advice ahead of time.
I think you will have to modify the frame horns and brackets.
interesting...i put an 03 grille on my 01, bolted right in. was thinking about finding a bumper but if its not bolt on il leave it alone.
ez way to find out is trying to buy and aftermarket bumper and seeying what yrs i will fit if it says 99 to say 05 ur good but if not well then pull out the welder
Never seen a conversion bracket for the 03+ bumpers. Prob ezer to do a denali front end. Cutting and welding will most likely have to me done.
If your going to do it go with a denali or get a ss bumper from street scene and be different.
Go to dealership and tell they u have 03 gmc and u need the front bumper brackets for the frame , they make they where u cut off your old ones and slide. These on the inside of your frame and drill hole and they bolt on real easy this how they r repaired if there damaged real bad in a wreck
+1Quote:
Originally Posted by GenIII_4Ever