Torque Converter bolts, What size?

I have some troques style adapters but they dont seem to be the right size.. Anyone know what size they are?

15mm i think

I figured metric, the ones I have are not..

10mm x 1.5 pitch x 23mm thread length.

^^^ What he said. The OEM's have a 15mm hex and an 8mm (or 10mm??) allen key in the middle.

15mm

i bought new ARP converter bolts from summit for super cheap.

To be VERY clear Greg answered the question asked. Greg gave the specs of the bolt, shank diameter, thread pitch, and threaded shank length. I then answered both tool questions. Yes, I said "shank" and "tool" in the same post.

Quote:

---

Originally Posted by GasGuzzler

To be VERY clear Greg answered the question asked. Greg gave the specs of the bolt, shank diameter, thread pitch, and threaded shank length. I then answered both tool questions. Yes, I said "shank" and "tool" in the same post.

---

Thanks for the info guys, didnt expect that.. Just thought I would see if you knew.. It wont be fun getting the stripped one out.



" i bought new ARP converter bolts from summit for super cheap. "

Going to order a set today then...

Quote:

---

Originally Posted by GasGuzzler

^^^ What he said. The OEM's have a 15mm hex and an 8mm (or 10mm??) allen key in the middle.

---

Quote:

---

Originally Posted by dallas

It wont be fun getting the stripped one out.

---

Please refer to Nathan's post. Are the inside Hex or Allen key threads stripped? Or is the outside of the bolt head stripped? There are two ways to skin this cat...