Printable View
Mac Grubered this to remove valve springs , works slicker than snot , 2 springs at once , no pulling , just tighten bolt and loosen bolt .
http://i71.photobucket.com/albums/i1...Compressor.jpg
Copied Crane Cams design , used a 10.9 harden M6 1.0 bolt , little rough around the edges , but worked great .
Nice. That would have been handy at the cam swap.
Community tool , I am through with it , if anyone wants to use it they can have it .
With one stipulation , you have to pass it on when someone else needs to use it .
:beerchug::hshake:Quote:
Originally Posted by use2bfo
Sweet.
nice!!!
Well got the Mac Grubber tool in the mail yesterday, looks good to go. Waiting to swap the cam when i get back from brazil next week.
Thanks again. Any one need this thing after i am done let me know. I will mail to you.
Not a problem , enjoy !
Well Done with the Tool thanks again. Worked perfectly. Let me know who needs it next
http://www.ls1truck.com/upload/files...37;20truck.JPG
http://www.ls1truck.com/upload/files...0truck%202.JPG
Glad it worked for you . Nice isn't it ? Two at once , no fuss no muss . :beerchug: