90mm TB & intake with wiring harness adapter

UPDATE: Used 90mm intake from a GTO. All rails, injectors, sensors, gaskets, etc. included. Also included are brand new intake bolts and a new TB gasket. I also have a wiring extension for something I bought from Katech, but I can't remember what sensor it went to. $150 OBO

90mm TB & harness are sold.

http://www.ls1truck.com/upload/files/21/90mm.jpg

tell me your upgrading

Quote:

---

Originally Posted by duckysbht

tell me your upgrading

---

;)

The extension wire should be for the MAP sensor since its now at the front of the intake behind the throttle body on LS2 intakes.

Quote:

---

Originally Posted by RedHeartbeat

The extension wire should be for the MAP sensor since its now at the front of the intake behind the throttle body on LS2 intakes.

---

Thank you sir!

I'll give you free retunes!

Quote:

---

Originally Posted by farmtruc

I'll give you free retunes!

---

I thought I had those already????? :spit:

Anyone know if this will be a direct swap with my stock set up and 42 lb injectors?? If not, what else would be needed??

Quote:

---

Originally Posted by RedHeartbeat

The extension wire should be for the MAP sensor since its now at the front of the intake behind the throttle body on LS2 intakes.

---

you dont have to have the extension...there is enough wire in the stock harness to easily make it work...

man if you want to sell the 90 and harness i would be very interested FYI :melissa:

Quote:

---

Originally Posted by mean05

you dont have to have the extension...there is enough wire in the stock harness to easily make it work...

man if you want to sell the 90 and harness i would be very interested FYI :melissa:

---

Oh well, I already have it.

I would like to try and sell together first. Send me a PM on what you were thinking though...