I have a '04 RCSB and I'm looking at dropping it. Is there any drops that you can run stock rims and tires without any problems. Looking at a 2/4 drop. I cant afford rims and tires yet.
Printable View
I have a '04 RCSB and I'm looking at dropping it. Is there any drops that you can run stock rims and tires without any problems. Looking at a 2/4 drop. I cant afford rims and tires yet.
i ran my stock rims and tires on my 4/8 drop... :bow:Quote:
Originally Posted by web7433
yeah...you will have to do control arms on the front...if you do spindles you have to run 17' or bigger wheels.
oh...you have an 04 you should have 17's stock....eh....your good.
hurry up and lower it!
I have 16" rims. I was reading about DJM kits and they say you have to run 17's or bigger.. Is there anything else I have to buy other than the kit to install. New ball joint...etc...:hyper2:Quote:
Originally Posted by banker099
hey,
I just finished my DJM 4/6 drop kit and im running stock 16" rims with a 255/75 tire and its looks pretty good no driving problems or rubbing. I also used my stock shocks and there working great until my new shocks come it. I havent bottomed out at all yet.
Brandon
Yea I will just have to call these guys up at DJM and see what they have to say. I just dont want to sacrafice ride over looks. It might take me a year to get money for rims. Im even looking at just the rear shackle kit too. My thoughts on that though, I would want it lower after a couple months. Any Ideas?
the djm kit should come with the ball jointsQuote:
Originally Posted by web7433
the kit comes with everything
sweet.. anybody have pics of a 2/4 drop...
2/4 on 20'sQuote:
Originally Posted by web7433
http://i39.photobucket.com/albums/e1...n/IMG_0199.jpg
3/6 on 16's with 255/65 tires
http://i39.photobucket.com/albums/e1...k/HPIM2695.jpg
4/8 drop on stockers
http://i39.photobucket.com/albums/e1.../DSC012761.jpg