Printable View
Hey guys got a 2004 LQ4 in my S10 and was looking at getting a Katech stage 2 cam...
Stage II Camshaft Kit P/N: KAT-A3702
229 / 229 @ .050, .576 / .576 lift, 116 LSA
Lopier Idle than Stage I but still great driveability awesome power
Matched Valvesprings
Custom Pushrods
Price: $595.00
needed to know if .576 lift would cause my valves to hit the piston or if they had enough clearence for that??
You have way more clearance than that. Get as close to .600 lift as you can get. :thumb: You'll definitely need the springs, too.
hell you have enough clearance to run around a .650 lift lol...i love these LS based motors
It's not the lift that determines clearance....when the valves are open the piston is down in the cylinder. It's the duration and ramp rate that generally determine clearance.
well that duration would be fine then huh?
well i know low 250's have been run on these motors
cool thanks alot fellas i think im gonna pick that cam up here in the next
month