Anyone around Austin with tuning software??

I am needing to back off a few degrees of timing for the n20 but I hate to have to send mine back to Wait 4 me just for that.

So if anyone could help me out I would be willing to kick ya a few bucks.

-Chris

I'll just put this out there, come on down, the tune is $375 and you're set, free retunes and we'll hook up the wideband and scanning software to dial in the a/f ratio and check for any KR.
You may not need to pull any timing if the timing table is convervative to begin with.

later,
allen

Quote:

---

Originally Posted by farmtruc

I'll just put this out there, come on down, the tune is $375 and you're set, free retunes and we'll hook up the wideband and scanning software to dial in the a/f ratio and check for any KR.
You may not need to pull any timing if the timing table is convervative to begin with.

later,
allen

---

Im going to be buying HPTuners from you really soon (next on the list) so id hate to have to spend the $375 for a full tune.
I am going to be installing a wideband LC-1 gauge with the juice so I can keep a eye on that, just worried about the KR.

So say I buy HP Tuners from you would you be able to walk me through getting the n20 setup correctly??

Thanks for the help BTW.
-Chris