Traction bars

Does anyone know if these will fit my 04 2WD VHO? It is lowered with 3" drop springs in the rear, but I don't think that will matter.

Lakewood bars

Thanks in advance.
S.C.

not sure if they will or not, but id use Cal tracs if I where you...way nicer product

I have them on my truck and they did work, but I already have them sold since Im changing my setup.

JJ

and you sold your Cal tracs, shame on you

<div class='quotetop'>QUOTE(shakesvho &#064; Jun 14 2007, 11&#58;52 AM) [snapback]96735[/snapback]</div>

Quote:

---

and you sold your Cal tracs, shame on you
[/b]

---

I know, I decided to keep my truck. But the Caltracs look like a PITA to put on. So, here I am.

caltracs are easy to put on..jsut drop and reinstall the leaf...very simple and they work the best&#33;

<div class='quotetop'>QUOTE(bgray &#064; Jun 14 2007, 11&#58;44 PM) [snapback]96816[/snapback]</div>

Quote:

---

caltracs are easy to put on..jsut drop and reinstall the leaf...very simple and they work the best&#33;
[/b]

---

how is the ride, I have a 2/4 and its riding just right

well the cal tracs are pre loadable..so if you are only concerned about traction at the strip then just unload them and they will drive like factory....loaded they are a bit stiffer because they are essentially pushing the springs back down

<div class='quotetop'>QUOTE(bgray &#064; Jun 17 2007, 09&#58;10 PM) [snapback]97073[/snapback]</div>

Quote:

---

well the cal tracs are pre loadable..so if you are only concerned about traction at the strip then just unload them and they will drive like factory....loaded they are a bit stiffer because they are essentially pushing the springs back down
[/b]

---

I think there is a setting for strip/street "just touching the leaf" have you tried this setting

well you can set them however you want...hard...soft..or in between...jsut twist it to or from....100% customizable